top of page

Switch Module PC-S

PC-S_edited.png

Application

Switch Modules are designed for use in all switching applications. The Switch Module accepts incoming unswitched power and provides both a switched and an unswitched output connector. Switch modules are supplied with a flexible armor drop for connection to the wall switch(es).

Features

  • Easily installed

  • Connects to all standard fixtures

  • Push-in terminals allow fast, easy fixture connection

  • Full 20 amp rating

  • Single, dual and three circuit models

  • #12 AWG copper conductors standard

  • #10 AWG copper conductors optional

  • 600V, 90º C insulation

  • Dead front construction for safety

  • Connectors are color coded for easy voltage identification

  • Keyed components assure proper connection, function and safety

  • Positive locking clips prevent accidental disconnection

  • Approved for installation in air handling spaces other than ducts and plenums

  • UL listed

Downloads

Additional Information

  • Switch Modules consist of a metallic enclosure providing an input connector and two output connectors, one switched and one unswitched. A flexible armor cable drop is also provided with 8" pigtail leads for connection to the local switch(es). Switch modules are factory prewired and rated at 20 amps.

    All models include an internal wiring schematic on the enclosure's cover plate. Switch Module connectors provide recessed electrical terminals that result in a dead front design for added safety. All connectors are color coded for easy voltage identification and are keyed to allow mating connections only with components of the same voltage. Secure connections are assured by locking clips on the component rear cup assemblies which prevent accidental disconnection. Cable length is based on project requirements.

  • Plug-N-Go Switch Modules accommodate all single or multiple circuit switching applications for which the system is designed.

     

    NOTE: Switch Modules are manufactured using type MC cable with #12 AWG copper conductors and 90°C insulation and should be supported in accordance with National Electrical Code requirements.

  • Connector Color → Voltage

    Gray → 277/480 and 480VAC

    Brown →120/208, 208 and 240VAC

    Purple → Dual Neutral 120/208VAC

    Khaki → Dual Neutral 277/480VAC

    Green → Isolated Ground 120/208VAC

bottom of page